Canpack Helmond

Canpack Helmond

Safety and productivity of our people. Canpack Helmond improves the working climate for employees in a packaging factory thanks to adiabatic cooling.

Sector

Industry

Location

Helmond, Netherlands

Solution

Adiabatic cooling

Client

Canpack

Canpack's climate challenge

The main problem at Canpack Helmond was the high temperature in the factory, which affects the concentration, safety and productivity of the people working there.

Canpack's climate challenge

The big problem was the high temperature in our factory. The high temperature causes loss of concentration in our people. So it is about the safety and productivity of our people.

Sander Eier, Maintenance Manager at Canpack Helmond

The solution of Kingspan Light + Air

The technical solution became cooling with adiabatic cooling. Adiabatic cooling provides lower energy consumption than traditional air conditioning systems. With the data from the survey and complex computer simulations, such as Computational Fluid Dynamics, we can guarantee the results. With CFD we can visualise all the temperatures we can expect in a factory.

The adiabatic cooling system lowers the temperature and has created a safe and productive environment for the employees of Canpack. Canpack was so pleased with this that four Canpack factories have now been fitted with this system. Not only here in the Netherlands, but also two factories in the US and one factory in Romania.

The solution of Kingspan Light + Air

We did a site survey in which we carried out technical air measurements. Based on this data we made a good design, to prevent an undersized or oversized installation. We did it first-time right!

Stefan van der Velden, Climate control

See the project in motion

A short film on the adiabatic cooling installed at the Canpack Helmond factory.

Talk to us about your project

Looking for a renovation or transformation solution? We are happy to think along with you.

Main Navigation